Shuswap language

Shuswap

ʃəxwəpməxtʃín

Spoken in Canada

Region Central and Southern Interior of British Columbia

Ethnicity Shuswap people

Native speakers 1,650^[1] (2006)

Language family

Salishan

Interior Salish
- Northern
  - Shuswap

Language codes

ISO 639-3 shs

This page contains IPA phonetic symbols in Unicode. Without proper rendering support, you may see question marks, boxes, or other symbols instead of Unicode characters.

The Shuswap language, known to its speakers as Secwepemctsín [ʃəxwəpəmxˈtʃin], is the traditional language of the Shuswap people (Secwépemc [ʃəˈxwɛpəmx]) of British Columbia. An endangered language, Shuswap is spoken mainly in the Central and Southern interior of British Columbia between the Fraser River and the Rocky Mountains. There are however over 1600 remaining speakers in British Columbia according to the most recent Canadian census in 2006.^[1]

Shuswap is the northernmost of the Interior Salish languages, which are spoken in Canada and the Pacific Northwest of the United States. Two eastern and five western dialects of Shuswap are recognized: Kinbasket and Shuswap Lake (eastern); Canim Lake, Chu Chua, Deadman's Creek-Kamloops, Fraser River, and Pavilion-Bonaparte (western). The other northern Interior Salish languages are St'at'imcets and Nlaka'pamux.

Most of the material in this article is from Kuipers (1974).^[2]

Phonology

The Shuswap language has many consonants which the Roman alphabet is typically not used to represent. Two systems of representing Shuswap sounds are in use. One is the system used in Kuipers’ 298 page monograph on the language. It uses some letters which are not part of the Roman alphabet. The other system is based on one devised by Randy Bouchard of the British Columbia Language Project.^[3] It is based entirely on the Roman alphabet. The one exception is the symbol 7, which is used to represent a consonant. The Bouchard style system appears to be the one in use among Shuswap people themselves. Aside from the different symbols used, other differences exist between the two systems. The Kuipers’ system makes extensive use of automatic alternations. For example, the letter n is sometimes pronounced [n], sometimes [ən], and sometimes [nə]. The choice of pronunciation is based on automatically applied rules. The reader is expected to know these rules. The rules cover three classes of changes: (1) automatic darkening of vowels (Non-automatic darkening of vowels is covered under Phonological Processes.), (2) automatic alternation of sonorants between consonantal and vocalic pronunciation, and (3) alternation of plain velars, uvulars, and laryngeals with the corresponding rounded sounds. The Bouchard style system does not appear to require the reader to know so many alternation rules. Examples of words written in the Bouchard style can be seen on two websites.^[4]^[5] These websites do not contain enough examples to show how all the automatic alternations are handled in the Bouchard style system. Therefore the Kuipers’ system of spelling is used in this article.

Vowels

The Shuswap language has five full vowels, /a/, /e/, /i/, /o/, /u/, and one reduced vowel, /ə/.

Main phonetic values of the Shuswap vowels
	Front	Central	Back (Rounded)
Close	i [i ~ e]		u [u ~ o]
Mid	e [ɛ]	ə [ə]	o [ɔ]
Open		a [a]

An additional vowel, /ʌ/, is rare and often replaced by /e/ or /a/. Its description is ambiguous. Kuipers gave its phonetic value as [ʌ], indicating a mid unrounded back vowel, but described it in words as a mid central vowel.

There are restrictions on the distribution of vowels. The vowel /ə/ is restricted to unstressed syllables. The vowels /a/ and /o/ also occur in unstressed syllables, but only in a few words. Vowels /i/ and /u/ are restricted to stressed syllables.

Automatic vowel darkening

The previous table shows the normal pronunciation of the vowels. Three of the full vowels, /e/, /i/, and /u/, are subject to an automatic process called darkening, which changes how these vowels are pronounced. Automatic darkening is predictable; it occurs before uvular obstruents and before or after uvularized sonorants. It is not reflected in the Kuipers spelling system.

Example: e [ɛ] in ‘he shoots it’ qemns [ˈqɛmənʃ], but e [a] in ‘I shoot it’ qeqmn [ˈqaqmən]

Vowel	Normal pronunciation	Darkened pronunciation
e	[ɛ]	[a]
i	[i ~ e]	[ɪ ~ ɛ]
u	[u ~ o]	[ɔ]

Consonants

Consonants are divided into two classes, obstruents and sonorants. In the tables which follow, pronunciations are given in square brackets in IPA transcription. The notation is the same as that of Kuipers (1974), except in one instance. Kuipers used a difficult to reproduce symbol for χ, an x with an accent mark placed above it.

Obstruents

		Labial	Dental-lateral	Dental-palatal	Velar		Uvular		Laryngeal (plain)
		Labial	Dental-lateral	Dental-palatal	Plain	Rounded	Plain	Rounded	Laryngeal (plain)
Plosives	Plain	p [p]	t [t]	c [tʃ]	k [k]	k° [kʷ]	q [q]	q° [qʷ]
Plosives	Glottalized	p’ [pʼ]	t’ [tɬʼ]	c’ [tʃʼ]	k’ [kʼ]	k’° [kʷʼ]	q’ [qʼ]	q’° [qʷʼ]	ʔ [ʔ]
Fricatives			λ [ɬ]	s [ʃ]	x [x]	x° [xʷ]	χ [χ]	χ° [χʷ]	h [h]

Plain plosives are usually unaspirated, and can be voiced in some environments.
The pronunciation of the dental-palatal obstruents c, c', and s ranges to [ts], [tsʼ] and [s].
Glottalized dental-lateral plosive t’ [tɬʼ] can also be pronounced as a glottalized dental plosive [tʼ].

Sonorants

	Labial	Dental	Palatal-velar		Laryngeal-uvular
			Plain	Velarized	Uvularized		Plain (rounded)
			Plain	Velarized	Plain	Rounded	Plain (rounded)
Plain	m [m], [əm]	n [n], [ən] l [l], [əl]	y [j], [iː]	γ [ɰ], [əː]	ʕ [ʕ], [aː]	ʕ° [ʕʷ], [ɔː]	w [w], [uː]
Glottalized	m’ [mˀ], [əmˀ]	n’ [nˀ], [ənˀ] l’ [lˀ], [əlˀ]	y’ [jˀ], [iʔ]	γ’ [ɰˀ], [əʔ]	(ʕʼ) [ʔ], [aʔ]	ʕ°’ [ʕʷˀ], [ɔʔ]	w’ [wˀ], [uʔ]

The sonorants are voiced. Since they can be consonantal or vocalic, a pair of pronunciations is given for each in the table. Vocalic variants occur only in unstressed syllables.

Consonantal forms of glottalized sonorants occur only after vowels.
The plain sonorants when vocalic have a different pronunciation at the beginning of a word: [mə], [nə], [lə], [jə], [ɰə], [ʕə], [ʕʷə], and [wə].
The long vowels representing plain vocalic sonorants are variable in length and may be short.
There is no glottalized plain uvular sonorant *ʕˀ. Where this ought to occur due to phonological processes, what occurs instead is ʔ when a consonantal form is required, and (unstressed) aʔ when a vocalic form is required.

Consonantal/vocalic variation of sonorants

The variation of sonorants between consonantal and vocalic pronunciations is automatic, and is not indicated in the Kuipers’ spelling system. The rule for determining this as follows:

To start, all sonorants in a word are to be considered vocalic.
Then, beginning from the right hand side of the word, a sonorant in any one of the following situations is changed to consonantal:

a vowel on its right side;
a vocalic sonorant on its right side; or
a vowel on its left side.

Example 1: l {{IPA|[l], m [m] and m [əm] in variants of ‘go ahead!’ χílme [ˈχilmɛ] and χílmxe [ˈχiləmxɛ]

Example 2: w [wə] in ‘downstream’ wtemtk [wəˈtɛmtk]

Example 3: l [l] and γ [əː] in ‘waterfall’ k’°əλlγʔép [kʷʼəɬləːˈʔɛp]

Example 4: l [l], w [u], y [j] and n [ən] in ‘I catch something in a trap’ lélwyn-kn [ˈlɛlujən kən]

Syllable Structure

A Shuswap word consists of a stem, to which can be added various affixes. Very few words contain two roots. Any stressed root can have an unstressed alternative, where the vowel is replaced by [ə].

Most roots have the form CVC or CC (the latter only if unstressed). Other roots are CVCC or CCVC.

Suffixes begin either with a stressed vowel (dropped in forms where the root is stressed) or a consonant. Prefixes generally have the form C- or CC-.

Stress

Stress in Shuswap is not very prominent, and occurs only in longer words. Since [u] and [i] are always stressed and [ə] never is, stress is usually fairly simple to predict.

Phonological Processes

Although Kiupers (1974) does not specify, in many cases the glottalized or rounded version of a consonant seems to represent an allophonic variation. For example, consonants which have a rounded form are rounded before and after [u]. However, glottalization can be contrastive (the root q’ey-, "set up a structure," versus q’ey’-, "write") or allophonic (the root q’ey- appears with a glottalized final consonant in s-t-q‘ey’-qn, "shed"). Consonant reduplication can also have an effect on glottalization.

There are a number of ways in which sounds are affected by their environments. Resonants in the vocalic position are preceded by an automatic schwa, for example the word /stʼmkelt/ ("daughter"), pronounced [stɬʼəmkelt]. The darkening of vowels, as described below, is another case.

The distribution of vowels is quite complex. The vowels have the following main variants:

i = [i~e]
u = [u~o]
o = [ɔ]
e = [ɛ].

/a/ and /ʌ/ are unchanged. The environment around uvulars and velars produces a different set of variants, including occasional slight diphthongs. Additionally, some roots cause darkened vowels to appear in suffixes; one example is the prefix -ekst ("hand, arm"), which is darkened in x°əl’-akst. The darkened vowels are as follows:

e = [a]
u = [o]
i = [e].

Morphology

Affixes

Shuswap's affixation system is robust. A nominalizing prefix s- is used to derive nouns from verbs, and prefixes to indicate a resulting state are added to verbs. A sample of Shuswap's small number of prefixes is below:

/t’l’-/: during a period in the past
/c-/ or /s-/: hither
/t-/ or /tk-/: on top of, on the outside
/wλ-/: group of people
/ʔ-/: second person singular possessive

Most nouns contain suffixes. Suffixes are also used to indicate transitive, intransitive, and imperative verbs. Below are a few examples taken from the extensive collection of Shuswap suffixes:

/-eps/: back of neck
/-tem’/: bottom, canyon, lowland
/-icÆeʔ/: surface, hide
/-esq’t/: day
/-eλq/: berries
/-el’tx°/: a sheet-like object, skin, bark

Morphological Processes

Shuswap makes extensive use of reduplication. Some examples of simple reduplication are:

Initial reduplication: [s-tíq’m] (bitterroot) to [tətíq’m] (prepare bitterroots)
Final reduplication: [pux°-m] (blow) to [pəx°úx°] (swell up)
Total reduplication: [piq] (white) to [pəq-píq] (flour)
Consonant reduplication

In addition, there are several types of complex reduplication, involving patterns such as 11V12, 112V23, and 1123V34 (where 1 represents C₁, etc.).

Not all types of reduplication are productive and functional. Total reduplication indicates plurality and consonant reduplication is diminutive, but most other reduplications are difficult to explain.

In addition to reduplication, root morphemes can be modified by interior glottalization, such that a root CVC appears as CʔVC. Although the process is not productive, many recorded forms refer to a state, for example [pʔeγ] (cooled off) from [peγns] (he cools it off). Consonant reduplication can proceed as usual with interior glottalization.

Syntax

Word Order

Word order in Shuswap is relatively free; syntactical relationships are easily conveyed by the case marking system. However, it is common but not necessary for the predicate to head the sentence.

Sentences with predicate first:

wist γ-citx the house is high
cut l-nχpeʔe my grandfather said

Sentences with subject first (rare):

γ-sq°yic m-cunsəs γχ°ʕ°elmx Rabbit was told by fox

Case Marking

Shuswap uses two cases: the absolutive, for the subject of an intransitive verb, the subject of a transitive verb, and the object of a transitive verb; and the relative, for all other cases (for example, the actor of a passive verb, or an adverb).

Relative Case:

wist γ-citx the house is high
m-tʔeyns γ-χ°ʕ°elmx γ-sk’lep Fox met Coyote